Raccoon Biker Cartoon Coolest Car Stickers
![Trust badge](https://img.thesitebase.net/themes/3/assets/0x360@trust_badge.png 360w, https://img.thesitebase.net/themes/3/assets/0x540@trust_badge.png 540w, https://img.thesitebase.net/themes/3/assets/0x720@trust_badge.png 720w, https://img.thesitebase.net/themes/3/assets/0x900@trust_badge.png 900w, https://img.thesitebase.net/themes/3/assets/0x1080@trust_badge.png 1080w, https://img.thesitebase.net/themes/3/assets/0x1296@trust_badge.png 1296w, https://img.thesitebase.net/themes/3/assets/0x1512@trust_badge.png 1512w, https://img.thesitebase.net/themes/3/assets/0x1728@trust_badge.png 1728w, https://img.thesitebase.net/themes/3/assets/0x2048@trust_badge.png 2048w, https://img.thesitebase.net/themes/3/assets/0x540@trust_badge.png 540w)
Size:S.M,L
Picture Display:
Step 1: Clean the position on the car body that needs to be attached, and wipe it dry with a clean towel
status.
The second step: directly tear off the bottom paper of the sticker, paste it on the part to be installed, and scrape it with a scraper.
【Tips】
①Dry pasting method-suitable for small stickers: when dry pasting, you can't paste it all at once.
First paste the right side, hang the left side, then push from the right side to the left side, and paste while scraping
go with. If there is a transfer film, it can be removed directly.
2 Wet sticking method-suitable for large stickers: spray on the body and car stickers
Released detergent water (the detergent water can play a role in lubricating, avoid the wrong position
Can't be moved), paste, smooth, scrape out the water in the car sticker, and at the same time
Squeeze it out, after all scraping, keep it for 15-20 minutes, and wait until the sticker is completely dry
Then tear off the transfer film on the surface of the sticker. If you want the sticker to dry quickly, you can use heat
Gently blow the air gun to heat it up (pay attention to the distance). After the sticker is dry, you can turn it
Remove the film.
【Precautions】
①Be careful when installing the stickers, and be careful not to let the stickers stick together.
②Please do not wash the car within three days, because the sticker has not been completely pasted within this time, so wash
The high-turn water column of the car will affect it. Washing the car after three days is fine.
Buyer's Reading]
①Because some larger stickers are rolled up during the packaging and delivery process,
The bottom paper and transfer film of the sticker are a little airy, and some bottom paper will be a little wrinkled, please
Don't worry, this is a normal phenomenon and does not affect the quality of the sticker and the installation process.